Skip to content
Ductless mini-split indoor unit mounted on a wall after an AC installation by Chubby's HVAC near Corona, CA

New systems · Corona, CA

AC Installation and Replacement in Corona, CA

AC installation in Corona, Eastvale, Norco and Riverside. Chubby's HVAC replaces central air conditioners and gas furnaces and installs ductless mini-splits, sized with a load calculation and finished with a full startup.

Request Service

You can also text (951) 496-7973.

AC Installation From Chubby's HVAC

Chubby's HVAC installs and replaces air conditioning systems for homes in Corona, Eastvale and surrounding areas. Every install starts with a load calculation and a static pressure test, so the new system fits the house and the ductwork can carry its air.

Central Air Conditioners and Furnaces

We replace the outdoor condenser and the indoor furnace or air handler as a matched system. The condenser sits level on a pad with vibration-isolation pads, and the indoor unit is leveled and secured.

Ductless Mini-Splits

We install ductless mini-split systems for ADUs and other rooms or buildings without ductwork. Each one is sized to the space it serves, the same way we size a central system.

Smart Thermostats

We install and program a smart thermostat with each new system and show you how to use it before we leave.

The Brands We Install

We are not tied to one brand and usually work with two or three. AC Pro is the one we install most. It is designed and made by Lennox and keeps the price of a new system competitive.

Three outdoor mini-split condensers installed in a row by Chubby's HVAC, serving Corona and Eastvale, CA

Load Calculations Instead of the Rule of Thumb

Many companies serving Corona, Norco and surrounding areas still size a new system at about 400 square feet per ton, so a 1,700 square foot house gets a 3.5 or 4 ton unit. That worked better 20 or 30 years ago, when equipment simply ran on and off. Today's equipment is far more sensitive to airflow.

We do a Manual J load calculation for the house and a Manual D duct design, and we test the static pressure of the existing ductwork. We measure the windows and check the insulation as part of it. A system sized this way runs the way the manufacturer intended and saves thousands of dollars over its life.

Gas furnace sized with a Manual J load calculation and installed in an attic by Chubby's HVAC near Norco, CA

Our Installation Process

Installs in Corona, Fontana and surrounding areas take one to two days. A simple swap is usually done in a day, and a job with more prep work takes two.

  1. Step 01

    Assessment

    We record the old equipment's model, age and sizing, and check the return, the filter grille, the ductwork, the electrical and the drain routing.

  2. Step 02

    Target Package

    We put together photos, measurements and your city's code requirements, and you approve the scope before we schedule.

  3. Step 03

    Removal

    We recover the old refrigerant under EPA rules and haul away the old furnace or air handler and condenser.

  4. Step 04

    Installation

    We braze the copper lines while purging with nitrogen, pressure test, pull a deep vacuum and charge to the manufacturer's specs.

  5. Step 05

    Startup

    We dial the system in to the manufacturer's specifications and check the temperature split and static pressure.

  6. Step 06

    Handover

    We clean up, photograph the job and give you a binder with the registration, warranties and thermostat instructions.

Why Hire Chubby's HVAC for AC Installation

Chubby's HVAC installs systems in Riverside, Corona and surrounding areas as a licensed C-20 contractor, CSLB #1145051, and we are insured.

  • Sizing. We size every system with a load calculation, not square footage alone.
  • Ductwork. We test the existing ductwork and tell you whether it can stay.
  • Warranty. Parts carry the manufacturer's warranty, and we add a labor warranty.
  • Documentation. We photograph each step and document any change to the scope with you.

Areas Served

Chubby's HVAC works from Corona across the Inland Empire and surrounding areas, up to 75 miles out.

  • Corona
  • Eastvale
  • Riverside
  • Norco
  • Fontana

More services

Other Services From Chubby's HVAC

Insulated flex ductwork in an attic after ductwork replacement by Chubby's HVAC, serving Corona and Norco, CA

Ductwork Replacement

We test static pressure and replace ductwork with R8 insulated flex duct.

Ductwork Replacement
Condenser coil cleaning during an AC maintenance visit by Chubby's HVAC, serving Corona and Eastvale, CA

AC Maintenance

We clean the system and take readings before and after every visit.

AC Maintenance

About us

Work With Chubby's HVAC

Chubby's HVAC Home Services works out of Corona and is licensed and insured, CSLB #1145051. We test the system before we recommend work and send you the readings and photos when the job is done.

Gas furnace in an attic ready for the $79 heating tune-up and safety inspection from Chubby's HVAC in Corona

Heating season

Book the $79 Heating Tune-Up

We clean the burners and blower, check and adjust the gas pressure, test for carbon monoxide and check duct airflow. It takes about an hour and a half.

Prices

Posted Prices

$14,000 to $16,000

Entry and Mid-Range System

A full system swap in Southern California usually lands in this range, without ductwork.

$18,000 to $22,000

High-Efficiency System

High-efficiency systems with more features usually land in this range, without ductwork.

$3,500 to $5,500

New Duct System

A new duct system usually adds this much to a system replacement.

$88

Diagnostic Visit

We charge $88 for a diagnostic visit and credit it toward the repair when you go ahead.

$79

Heating Maintenance and Safety Inspection

We clean the burners and blower, check the gas pressure, test for carbon monoxide and check duct airflow.

Every new system and duct price is confirmed in writing after we measure the home.

Chubby's HVAC working on an outdoor air conditioner condenser for a homeowner in the Corona, CA area

Same day, next day or within 48 hours

Schedule Service With Chubby's HVAC

Call or text Chubby's HVAC at (951) 496-7973, or send the request form, and tell us what the system is doing.

FAQ

AC Installation Questions

How long does a new AC install take?

One to two days. A simple swap of the old equipment can be done in one day. When the job needs more prep, we remove the old equipment and prep on day one, then install and start up the new system on day two.

How much does a new AC system cost?

In Southern California, entry and mid-range systems usually run $14,000 to $16,000. High-efficiency systems with more features run $18,000 to $22,000. Those prices are for a full system swap without ductwork, which usually adds $3,500 to $5,500.

What brands do you install?

We are not tied to one brand and usually work with two or three. AC Pro is the one we install most. It is designed and made by Lennox, it is popular across the Southwest, and it keeps prices competitive.

Do I need new ductwork with a new system?

Most of our installs include new ductwork. If your ductwork was designed properly, tests well for static pressure and is under 20 years old, you can keep it. We show you the readings and you decide.

What is a load calculation?

A load calculation, called a Manual J, works out how much heating and cooling your house needs from its size, volume, windows and insulation. We use it to choose the system size instead of guessing from square footage.

Do you install ductless mini-splits?

Yes. We install ductless mini-splits for ADUs and other rooms or buildings without ductwork. We size each one to the space it serves, the same way we size a central air conditioning system.

What warranty comes with a new system?

Every part carries the manufacturer's warranty. We add a labor warranty, and its length depends on the scope of the install. You also get a binder with your equipment registration and warranty papers.

Call now Text us