Skip to content
Gas furnace in an attic serviced during a furnace repair visit by Chubby's HVAC near Corona, CA

Heating · Corona, CA

Furnace Repair and Heating Service in Corona, CA

Furnace repair in Corona, Riverside, Eastvale and Fontana. Chubby's HVAC repairs gas furnaces, tests for carbon monoxide and runs a $79 heating maintenance and safety inspection.

Request Service

You can also text (951) 496-7973.

Furnace Repair From Chubby's HVAC

Chubby's HVAC repairs gas furnaces for homes in Corona, Riverside and surrounding areas. A furnace burns gas inside your home, so every heating visit includes a carbon monoxide test and a safety check along with the repair.

Ignition and Burners

We clean the burners, inspect the flame sensor and test the igniter or pilot so the furnace lights smoothly with a clean blue flame.

Blower and Inducer Motors

We check the blower motor's amp draw and its capacitor, and test the inducer motor that pulls exhaust out through the vent. We replace the motor or capacitor when it fails the test.

Safety Switches

We test the limit, rollout and pressure switches. These switches shut the furnace off when something is wrong, and a failed switch can keep the furnace from running at all.

Gas Pressure

We check the incoming gas pressure and the manifold pressure against the manufacturer's specifications and adjust them.

Filter and Airflow

We replace the filter or service your media filter, then measure the temperature rise across the furnace to confirm it is putting out the right heat with the right airflow.

Older gas furnace in an attic checked for ignition and safety switch problems near Corona and Riverside, CA

$79 Heating Maintenance and Safety Inspection

Chubby's HVAC offers a $79 heating maintenance and safety inspection for homes in Eastvale, Norco and surrounding areas. We clean the burners and the blower, check and adjust the gas pressure, test for carbon monoxide and check the airflow through the ductwork. The visit takes about an hour and a half.

Book it before the heating season so any problem shows up before the first cold night. If we find a part that needs repair, we give you the price before we do any work.

Carbon Monoxide and Heat Exchanger Checks

We check every furnace we work on in Corona, Fontana and surrounding areas for carbon monoxide. We test the air in the home and the air coming out of the vents.

We inspect the heat exchanger with a combustion analyzer and a camera for cracks, rust and stress fractures that can leak carbon monoxide. We also check the flue from the furnace to the roof cap for blockages, corrosion and loose connections.

Furnace and air handler serviced with a carbon monoxide test by Chubby's HVAC, serving Corona and Fontana, CA

Repair or Replace Your Furnace

We give homeowners in Riverside, Eastvale and surrounding areas a straight answer when a furnace repair gets expensive. If the repair is under about $800 and keeps the furnace running a couple more years, we recommend the repair.

If the repair is over $1,000 and the furnace is more than 20 years old, we talk through replacement and how long you plan to stay in the home. A new system is sized with a load calculation and installed in one to two days.

Why Hire Chubby's HVAC for Furnace Repair

Chubby's HVAC services furnaces in Riverside, Corona and surrounding areas as a licensed C-20 contractor, CSLB #1145051, and we are insured.

  • Safety First. Every heating visit includes a carbon monoxide test.
  • Written Checklist. We follow the same heating checklist on every furnace.
  • Credit. The $88 diagnostic is credited toward your furnace repair.
  • Straight Advice. We tell you when an older furnace is worth repairing and when it is not.

Areas Served

Chubby's HVAC works from Corona across the Inland Empire and surrounding areas, up to 75 miles out.

  • Corona
  • Eastvale
  • Riverside
  • Norco
  • Fontana

More services

Other Services From Chubby's HVAC

Condenser coil cleaning during an AC maintenance visit by Chubby's HVAC, serving Corona and Eastvale, CA

AC Maintenance

We clean the system and take readings before and after every visit.

AC Maintenance
New outdoor AC condenser on a level pad after an AC installation by Chubby's HVAC near Corona, CA

AC Installation

We size and install new air conditioners, furnaces and ductless mini-splits.

AC Installation
Insulated flex ductwork in an attic after ductwork replacement by Chubby's HVAC, serving Corona and Norco, CA

Ductwork Replacement

We test static pressure and replace ductwork with R8 insulated flex duct.

Ductwork Replacement

About us

Work With Chubby's HVAC

Chubby's HVAC Home Services works out of Corona and is licensed and insured, CSLB #1145051. We test the system before we recommend work and send you the readings and photos when the job is done.

Gas furnace in an attic ready for the $79 heating tune-up and safety inspection from Chubby's HVAC in Corona

Heating season

Book the $79 Heating Tune-Up

We clean the burners and blower, check and adjust the gas pressure, test for carbon monoxide and check duct airflow. It takes about an hour and a half.

Prices

Posted Prices

$79

Heating Maintenance and Safety Inspection

We clean the burners and blower, check the gas pressure, test for carbon monoxide and check duct airflow.

$88

Diagnostic Visit

We charge $88 for a diagnostic visit and credit it toward the repair when you go ahead.

$14,000 to $16,000

Entry and Mid-Range System

A full system swap in Southern California usually lands in this range, without ductwork.

$18,000 to $22,000

High-Efficiency System

High-efficiency systems with more features usually land in this range, without ductwork.

$3,500 to $5,500

New Duct System

A new duct system usually adds this much to a system replacement.

Every new system and duct price is confirmed in writing after we measure the home.

Chubby's HVAC working on an outdoor air conditioner condenser for a homeowner in the Corona, CA area

Same day, next day or within 48 hours

Schedule Service With Chubby's HVAC

Call or text Chubby's HVAC at (951) 496-7973, or send the request form, and tell us what the system is doing.

FAQ

Furnace and Heating Questions

What does the $79 heating special include?

We clean the burners and the blower, check and adjust the gas pressure, test for carbon monoxide and check the airflow through the ductwork. The visit takes about an hour and a half, and we go over what we found before we leave.

How do I know if my furnace is leaking carbon monoxide?

Often you can't, since carbon monoxide has no smell. A yellow or flickering flame and soot around the furnace are warning signs. Have the furnace tested every year and keep carbon monoxide detectors in the home.

How often should my furnace be serviced?

Once a year, before the heating season. Our heating checklist covers the safety and combustion checks, the burners and blower, gas pressure and airflow, so the furnace is ready before the first cold night.

Should I repair or replace my old furnace?

If the repair is under about $800 and keeps it running a couple more years, repair it. If the repair is over $1,000 and the furnace is more than 20 years old, we go through replacement with you before you spend the money.

How much is a furnace repair visit?

The diagnostic is $88, and we credit it toward the repair if you go ahead. We give you the repair price before any work starts. If you only need the yearly inspection, book the $79 heating maintenance visit instead.

Do you replace furnaces?

Yes. We replace gas furnaces as part of a system install, sized with a load calculation. Entry and mid-range systems usually run $14,000 to $16,000 in Southern California, without ductwork.

How long does the heating inspection take?

About an hour and a half. That covers the cleaning, the gas pressure check, the carbon monoxide test and the airflow check. We go over what we found and answer your questions before we leave.

Call now Text us